mini rc helicopter charger image
Alvin J
when i turn mine on
and i try to fly it
it justt turns 360 on the table without even going in the air and i tried trimming it like this and the buttons to trim but still...
plz help me any1 .
and also when its charge you charge the green light on the transmitter should turn off
but mine stays on and whn i remove the charger and try to fly it the red light flashes and the green light is still there
this is the exact heli i have
http://site.xheli.com/rc-helicopter1/rc-helicopter7.jpg
plz help me
Answer
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
Does anyone know of a good R/C plane or helicopter for under 100 dallars?
Addison
I want one that charges from the charger in 5-10 minutes (something like that). I've had one that charged from a wall charger or car but i didnt like that one - it took like 45 minutes nad was a piece of crap anyway. i see them in catalouges and online but i dont know if their good or not. if anyone has a good one or knows a friend with a good one like that can you please tell me. Thanks.
Answer
If you're taking indoors get the Havoc Helicopters.
http://www.amazon.com/Spinmaster-Hogs-Havoc-Heli-Colors/dp/B000NSFO3W/ref=pd_bbs_sr_2/103-7785282-1347854?ie=UTF8&s=toys-and-games&qid=1194433062&sr=8-2
Or the Palm Z mini indoor plane:
http://www.thinkgeek.com/geektoys/rc/93cf/
If you're taking indoors get the Havoc Helicopters.
http://www.amazon.com/Spinmaster-Hogs-Havoc-Heli-Colors/dp/B000NSFO3W/ref=pd_bbs_sr_2/103-7785282-1347854?ie=UTF8&s=toys-and-games&qid=1194433062&sr=8-2
Or the Palm Z mini indoor plane:
http://www.thinkgeek.com/geektoys/rc/93cf/
Powered by Yahoo! Answers
Title Post: micro rc helicopter????
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment