CGI03
They won't take it back they claim that i broke it. I did crash a few times but not from height or to fast because i cant fly it so i cant really crash it
Answer
Where did you buy it? If you bought it online, then you can't really do much but have it as a paper weight. If you bought it at a store, then you could pull what they pulled on you and purchase another helicopter and put the broken one back in the new box and say your child doesn't want it.
As for chinooks, the mechanism used for it to fly is very advanced. There is no guarantee these are going to be 100% perfect for every helicopter especially if it isn't an expensive hobby helicopter. The company "Syma" is not a company that you would want to depend on. Read the manual and follow the directions. That is all I could say.
Where did you buy it? If you bought it online, then you can't really do much but have it as a paper weight. If you bought it at a store, then you could pull what they pulled on you and purchase another helicopter and put the broken one back in the new box and say your child doesn't want it.
As for chinooks, the mechanism used for it to fly is very advanced. There is no guarantee these are going to be 100% perfect for every helicopter especially if it isn't an expensive hobby helicopter. The company "Syma" is not a company that you would want to depend on. Read the manual and follow the directions. That is all I could say.
why wont my mini rc helicopter fly outside?
Neil J
no its not the wind. im talking about the copter doesnt react to the remote like it does inside. outside theres more of a delayed reaction. tell me why is that?
Answer
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
Powered by Yahoo! Answers
Title Post: My new Syma S.026 mini Chinook RC helicopter spins out of control on takeoff. please help?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment