spartain00
and is about under a foot and at lest have replaceable parts or upgradeable parts
Answer
I always try to steer people away from cheap Chinese junk like Syma... But I have to admit the price is right. Just keep in mind that this is really a disposable helicopter. The quality control is horrendous and you will get no support from the manufacturer. Yes, some spare parts are available, but the design and engineering that goes into these cheap toys leaves a lot to be desired. As a for instance, the speed controls on Syma copters do not have any sort of LiPo cut off, so it can be very easy to ruin the battery.
For just $30 more you can get a true hobby grade helicopter with real manufacturer support if something goes wrong. For micro look at the Blade Scout: http://www.horizonhobby.com/products/blade-scout-rtf-3-ch-heli-BLH2700
For mini's, you have a lot more choices. Align makes some really fine helicopters, as does Blade. In my opinion, one of the better quality of the minis:
http://www.amainhobbies.com/product_info.php/cPath/2_382_707/products_id/220852/n/Align-T-Rex-100X-Super-Combo-Electric-RTF-Micro-Helicopter-Kit
Here is a list of quite a few micro's and minis:
http://www.amainhobbies.com/index.php?cPath=2_382_707&n=RC-Helicopters-Kits-Micro-Mini&sort=prl&filter_mfr=
Lastly, I would suggest purchasing a copter at a local hobby shop. That way you'll have local parts support and won't be waiting for the mail to arrive with a replacement part. You can just drive down the road and pick it up the same day if something breaks. A broken copter sitting on the workbench waiting for parts isn't much fun. Not to mention almost every hobby shop will have a knowledgeable person behind the counter to ask questions!
I always try to steer people away from cheap Chinese junk like Syma... But I have to admit the price is right. Just keep in mind that this is really a disposable helicopter. The quality control is horrendous and you will get no support from the manufacturer. Yes, some spare parts are available, but the design and engineering that goes into these cheap toys leaves a lot to be desired. As a for instance, the speed controls on Syma copters do not have any sort of LiPo cut off, so it can be very easy to ruin the battery.
For just $30 more you can get a true hobby grade helicopter with real manufacturer support if something goes wrong. For micro look at the Blade Scout: http://www.horizonhobby.com/products/blade-scout-rtf-3-ch-heli-BLH2700
For mini's, you have a lot more choices. Align makes some really fine helicopters, as does Blade. In my opinion, one of the better quality of the minis:
http://www.amainhobbies.com/product_info.php/cPath/2_382_707/products_id/220852/n/Align-T-Rex-100X-Super-Combo-Electric-RTF-Micro-Helicopter-Kit
Here is a list of quite a few micro's and minis:
http://www.amainhobbies.com/index.php?cPath=2_382_707&n=RC-Helicopters-Kits-Micro-Mini&sort=prl&filter_mfr=
Lastly, I would suggest purchasing a copter at a local hobby shop. That way you'll have local parts support and won't be waiting for the mail to arrive with a replacement part. You can just drive down the road and pick it up the same day if something breaks. A broken copter sitting on the workbench waiting for parts isn't much fun. Not to mention almost every hobby shop will have a knowledgeable person behind the counter to ask questions!
Which Helicopter should i get?
Rocketman
i want to know which one of these helicopter would be the best for an inexperienced flier like me or if you have another suggestion i would like to hear it or any other helicopter
http://www.xheli.com/wadr4rarecor.html
http://www.nitrorcx.com/exrccolag5co.html
http://www.nitrorcx.com/6newdeesccho.html
http://www.nitrorcx.com/new20es6chho.html
http://www.nitrorcx.com/wadrflyh26ra.html
http://www.xheli.com/18h32-arf-exi-450le.html
http://www.xheli.com/wa6dr22ein3d.html
http://www.xheli.com/ea503dae6rar.html
http://www.xheli.com/new-walkera-7-ch-dragonfly-1-b-ccpm-3d-aerobatic-radio-remote-control-electric-rc-helicopter-rtf-.html
http://www.xheli.com/new-frame-18h53-arf.html
thank you
Answer
As a fair but not great r/c heli pilot who owns a dozen or so helicopters, here's my $0.02 worth.
Your first decision is what type of heli to buy. There are three types in the batch you've listed above; co-axial (two counter-rotating main blades like the Walkera 5#10 above), fixed pitch (like the Falcon 40), or 3D (which most of your proposed heli's are ... like the EXI 450LE)
I have and have flown helicopters like each of these. Here's my take:
Co-axial: easiest to fly and cheap, but limited in that they can't perform prolonged forward flight or any acrobatics
Fixed pitch: harder to fly, cheap, no acrobatics
3D (Collective Pitch): harder to fly, most expensive and hardest to set up, but most versitile (with practice, these can do anything)
I'd recommend:
Co-axial: if you go this route, I'd buy an E-Flight Blade MCX. It's tiny, perfect for flying around the house, and is AMAZINGLY stable (even for a coaxial heli). If you want something a little bigger, try either the E-Flight Blade CX2 or E-Sky Co-Lama V4.
Fixed Pitch: I'd skip it...
3D: For starting out I'd go with the Eflight Blade 400 because it has relatively inexpensive replacement parts. Alternatively, I consider the Thunder Tiger Mini-Titan E325 or the Align TRex 450. All of these are well built, are widely available, and have lots of dealers stocking parts.
Bear in mind that all of these are sold in varrying degrees of completion... all need a motor, speed controler, battery, 3 cyclic servos, gyro and tail servo. These electronics can run $$, so don't get sucked in by something that costs $60 (and may cost $400 to complete). Read the fine print and understand what quality components you're buying (I ended up replacing all the servos, gyro, and battery on my first heli within weeks).
Also, if you're going to go all-in along the 3D route, start by buying yourself a decent transmitter that you can grow with. I'd recommend the Specktrum DX7 (great) or JR9303 2.4Ghz (best) if you have the cash (if not the Specktrum DX6i is good too).
Finally, buiding these things (other than the coaxial helis) can be a bit tricky and set-up is critical if you want to successfully fly. I'd spend some time on the r/c heli boards (runryder and helifever are good) and/or find a local hobby shop that caters to heli pilots.
Ok, that's it... good luck!
As a fair but not great r/c heli pilot who owns a dozen or so helicopters, here's my $0.02 worth.
Your first decision is what type of heli to buy. There are three types in the batch you've listed above; co-axial (two counter-rotating main blades like the Walkera 5#10 above), fixed pitch (like the Falcon 40), or 3D (which most of your proposed heli's are ... like the EXI 450LE)
I have and have flown helicopters like each of these. Here's my take:
Co-axial: easiest to fly and cheap, but limited in that they can't perform prolonged forward flight or any acrobatics
Fixed pitch: harder to fly, cheap, no acrobatics
3D (Collective Pitch): harder to fly, most expensive and hardest to set up, but most versitile (with practice, these can do anything)
I'd recommend:
Co-axial: if you go this route, I'd buy an E-Flight Blade MCX. It's tiny, perfect for flying around the house, and is AMAZINGLY stable (even for a coaxial heli). If you want something a little bigger, try either the E-Flight Blade CX2 or E-Sky Co-Lama V4.
Fixed Pitch: I'd skip it...
3D: For starting out I'd go with the Eflight Blade 400 because it has relatively inexpensive replacement parts. Alternatively, I consider the Thunder Tiger Mini-Titan E325 or the Align TRex 450. All of these are well built, are widely available, and have lots of dealers stocking parts.
Bear in mind that all of these are sold in varrying degrees of completion... all need a motor, speed controler, battery, 3 cyclic servos, gyro and tail servo. These electronics can run $$, so don't get sucked in by something that costs $60 (and may cost $400 to complete). Read the fine print and understand what quality components you're buying (I ended up replacing all the servos, gyro, and battery on my first heli within weeks).
Also, if you're going to go all-in along the 3D route, start by buying yourself a decent transmitter that you can grow with. I'd recommend the Specktrum DX7 (great) or JR9303 2.4Ghz (best) if you have the cash (if not the Specktrum DX6i is good too).
Finally, buiding these things (other than the coaxial helis) can be a bit tricky and set-up is critical if you want to successfully fly. I'd spend some time on the r/c heli boards (runryder and helifever are good) and/or find a local hobby shop that caters to heli pilots.
Ok, that's it... good luck!
Powered by Yahoo! Answers
Title Post: whats the best micro and mini sized heilcopter with the best gyro?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment