mini rc helicopter range image
Q. i have had 2 mini helicopters with auto stabliser but i want somthing more complex im also looking for something costing less than $300 (AUD) thanx for the advice.
Answer
I just recently got into the rc helicopters and purchased the ESky Lama V4. These mini copters are perfect for a beginner or novice who is looking for a unit that is easy to control. Another unit which is the sister to the Lama is the EFlite Blade CX and CX2. Both the Lama and the Blade are what are called coaxial units which give you effortless controlling. If you are looking for something a little more advanced, Both ESky and EFlite offer larger models that require a little more skill. All in all, most of these units will fall within your price range. Hope this helps!
I just recently got into the rc helicopters and purchased the ESky Lama V4. These mini copters are perfect for a beginner or novice who is looking for a unit that is easy to control. Another unit which is the sister to the Lama is the EFlite Blade CX and CX2. Both the Lama and the Blade are what are called coaxial units which give you effortless controlling. If you are looking for something a little more advanced, Both ESky and EFlite offer larger models that require a little more skill. All in all, most of these units will fall within your price range. Hope this helps!
why wont my mini rc helicopter fly outside?
Neil J
no its not the wind. im talking about the copter doesnt react to the remote like it does inside. outside theres more of a delayed reaction. tell me why is that?
Answer
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
Powered by Yahoo! Answers
Title Post: I need help choosing a rc helicopter to buy i dont want to need professional training?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment