mini rc helicopter how to fly image
Neil J
no its not the wind. im talking about the copter doesnt react to the remote like it does inside. outside theres more of a delayed reaction. tell me why is that?
Answer
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
What kind of rc helicopter should I be getting?
Chance
My dad is going to be getting me something for Christmas, $85 limit. I want a rc helicopter. Ive only had cheap walmart ones before, so i need some expertise. Im wanting a namebrand fairly decent sized helicopter that will be able take some minor crashes. I did a little research and it seems that the Align T-Rex 250 is decent. Any ideas? Remember I have $85 to spend, including taxes and shipping.
Answer
I wouldn't recommend the Align T-Rex 250, and it's over the budget anyways? The smaller the helicopter, the more crashes it can resist, and the cheaper the replacement parts are. Just the battery looks like it's 3 times more expensive than a mini helicopter, and you will need extra batteries if you would like to fly for more than 10 minutes.
Do you have a radio/controller already? If you do, you could buy the BNF version of the helicopter and it will be cheaper. If you don't, then look for the RTF version that comes with a radio/controller.
The Blade MCX RTF is $80 at Horizon Hobby
http://www.horizonhobby.com/products/blade-mcx-rtf-EFLH2200
It's a coaxil heli, so you will have to fly it indoors and outdoors only when it's not too windy. It can take a good beating, better than the t-rex, and the parts are pretty cheap.
These 3 are some I have looked at while I was doing research about rc helicopters when I wanted to purchase one. These are fun, you won't be able to do 3D tricks with them though. It depends how many channels was the one you had, these are 3 channels and good practice.
The Syma S107 is $27 at amazon. It's a beginner helicopter, but it's small and reviews say it does good in taking crashes (4 out of 5 stars).
The Helizone Combat fighter 3.5 Channels looks fun. It's $36.99 on amazon, and you can look up videos on youtube.
The Syma S107C has a built in camera, and it's $39 on amazon.
I purchased the Nano CP X BNF, and a DX6i receiver, and depending your age and experience, this is not a beginner one. But it's just something to look for in the future if you want to get into the hobby. The heli cost me $160 online, and the reciever/controller (DX6i) cost me $70 USED.
You could also suggest to him to look on craigslist for used ones, don't be uptight about it and demand a new one if your father can't afford ones over $85. I bought the DX6i for my boyfriend from craigslist, and it came in original box and everything, for less than half the price, and he loves it anyways. You could find a used Blade MCX or MCX2 for a really good price, and if it's from a person that looks like it's their hobby, it will probably be very well taken care of.
you or your father should check out this forum's for sale threads:
http://www.helifreak.com/forumdisplay.php?f=6
you can also feel free to ask questions on there, or check out the "newbie" section for advice, there has been many people also asking for a beginner heli, so you can read the responses.
Don't try to get a "professional" type helicopter because for those you need to make a bigger investment than just the helicopter. For an advanced heli you need an advanced radio, not the ones it comes with, and you will need to purchase a simulator to practice on because crashing the helicopter will cost you a lot of money!
Goodluck and have fun :)
I wouldn't recommend the Align T-Rex 250, and it's over the budget anyways? The smaller the helicopter, the more crashes it can resist, and the cheaper the replacement parts are. Just the battery looks like it's 3 times more expensive than a mini helicopter, and you will need extra batteries if you would like to fly for more than 10 minutes.
Do you have a radio/controller already? If you do, you could buy the BNF version of the helicopter and it will be cheaper. If you don't, then look for the RTF version that comes with a radio/controller.
The Blade MCX RTF is $80 at Horizon Hobby
http://www.horizonhobby.com/products/blade-mcx-rtf-EFLH2200
It's a coaxil heli, so you will have to fly it indoors and outdoors only when it's not too windy. It can take a good beating, better than the t-rex, and the parts are pretty cheap.
These 3 are some I have looked at while I was doing research about rc helicopters when I wanted to purchase one. These are fun, you won't be able to do 3D tricks with them though. It depends how many channels was the one you had, these are 3 channels and good practice.
The Syma S107 is $27 at amazon. It's a beginner helicopter, but it's small and reviews say it does good in taking crashes (4 out of 5 stars).
The Helizone Combat fighter 3.5 Channels looks fun. It's $36.99 on amazon, and you can look up videos on youtube.
The Syma S107C has a built in camera, and it's $39 on amazon.
I purchased the Nano CP X BNF, and a DX6i receiver, and depending your age and experience, this is not a beginner one. But it's just something to look for in the future if you want to get into the hobby. The heli cost me $160 online, and the reciever/controller (DX6i) cost me $70 USED.
You could also suggest to him to look on craigslist for used ones, don't be uptight about it and demand a new one if your father can't afford ones over $85. I bought the DX6i for my boyfriend from craigslist, and it came in original box and everything, for less than half the price, and he loves it anyways. You could find a used Blade MCX or MCX2 for a really good price, and if it's from a person that looks like it's their hobby, it will probably be very well taken care of.
you or your father should check out this forum's for sale threads:
http://www.helifreak.com/forumdisplay.php?f=6
you can also feel free to ask questions on there, or check out the "newbie" section for advice, there has been many people also asking for a beginner heli, so you can read the responses.
Don't try to get a "professional" type helicopter because for those you need to make a bigger investment than just the helicopter. For an advanced heli you need an advanced radio, not the ones it comes with, and you will need to purchase a simulator to practice on because crashing the helicopter will cost you a lot of money!
Goodluck and have fun :)
Powered by Yahoo! Answers
Title Post: why wont my mini rc helicopter fly outside?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment