Alvin J
when i turn mine on
and i try to fly it
it justt turns 360 on the table without even going in the air and i tried trimming it like this and the buttons to trim but still...
plz help me any1 .
and also when its charge you charge the green light on the transmitter should turn off
but mine stays on and whn i remove the charger and try to fly it the red light flashes and the green light is still there
this is the exact heli i have
http://site.xheli.com/rc-helicopter1/rc-helicopter7.jpg
plz help me
Answer
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
What is the best beginner RC helicopter? ?
I bought a double horse 9100 and I think it is way to advanced to for me. What do you guys think? I already cracked the head cover and a decorative bar is gone (does that matter?) I have flow a mini in door helicopter and that is too easy and I need something to start with that is under $100. Please help I really want to get into this hobby but I've gotten way over my head.
Answer
HI there,
If you find the mini heli too easy i suggest you start with a 250 sized heli. that is not too big, can be flown indoors and even outdoors on easy days.
You could start with a 4 channel (not 3d).
In my experience this is a very good heli to start with:
http://www.rc-heli-review.com/rc-heli-reviews/walkera-hm-v200d02
Easy to fly, very easy and cheap to repair in case you crash it and there are lots of spare parts availible. ALs very strudy model so won't break down on a soft crash.
Good thing is that it's even flybarless wich makes for a superiour flying experience.
Make sure you get the hovering under control before you go all out on the sticks.
It's a little more expensive (150 dollars) but i'll last you a long time before you grow out of this model and you won't break it that easily. If you really want to get into this hobby start out with this one and then after a year you can always upgrade to something bigger and more agile.
Good Luck
HI there,
If you find the mini heli too easy i suggest you start with a 250 sized heli. that is not too big, can be flown indoors and even outdoors on easy days.
You could start with a 4 channel (not 3d).
In my experience this is a very good heli to start with:
http://www.rc-heli-review.com/rc-heli-reviews/walkera-hm-v200d02
Easy to fly, very easy and cheap to repair in case you crash it and there are lots of spare parts availible. ALs very strudy model so won't break down on a soft crash.
Good thing is that it's even flybarless wich makes for a superiour flying experience.
Make sure you get the hovering under control before you go all out on the sticks.
It's a little more expensive (150 dollars) but i'll last you a long time before you grow out of this model and you won't break it that easily. If you really want to get into this hobby start out with this one and then after a year you can always upgrade to something bigger and more agile.
Good Luck
Powered by Yahoo! Answers
