shor_d_ing
i used to have a cheap mini rc helicopter and it was not very stable. it quickly was misplaced.
the other day a friend was playing with his new mini heli and it was extremely stable and easy to fly. he said it was a syma. i don't know what model but it was the metal frame.
im wondering if there is any other helis like this out there that are better, his budget was 50 bucks where im willing to spend more. any suggestions?
Answer
DUDE you have to check out the Z-Series Z008 Micro Helicopter w/Gyr !! this is a bad a$$ mini helicopter!! with LED lights
http://www.jatoytown.com/Z-Series-Z008-Micro-Helicopter-wGyro--As-low-as-3382_p_108.html
Its 4ch and VERY VERY VERY stable in the air with an all alloy body! Those cheap plastic 2ch and 3 ch helicopters are very unstable in the air.
This one on the other hand is one of the most stable I have seen for its size. With the hover blades you can even move it side to side which is awesome for a rc helicopter.
the retail on these are 89.99 but tell you what. use coupon code clist30 and that will give you 30% off the entire order which will make that helicopter around 60.00 which is a killer deal for that brand.
There is even a youtube video there on how that little guy flies. Check it out and let me know what you think..
There are other helicopters there too but as far as best mini one, this one takes the cake.
Hope this helps
DUDE you have to check out the Z-Series Z008 Micro Helicopter w/Gyr !! this is a bad a$$ mini helicopter!! with LED lights
http://www.jatoytown.com/Z-Series-Z008-Micro-Helicopter-wGyro--As-low-as-3382_p_108.html
Its 4ch and VERY VERY VERY stable in the air with an all alloy body! Those cheap plastic 2ch and 3 ch helicopters are very unstable in the air.
This one on the other hand is one of the most stable I have seen for its size. With the hover blades you can even move it side to side which is awesome for a rc helicopter.
the retail on these are 89.99 but tell you what. use coupon code clist30 and that will give you 30% off the entire order which will make that helicopter around 60.00 which is a killer deal for that brand.
There is even a youtube video there on how that little guy flies. Check it out and let me know what you think..
There are other helicopters there too but as far as best mini one, this one takes the cake.
Hope this helps
micro rc helicopter????
Alvin J
when i turn mine on
and i try to fly it
it justt turns 360 on the table without even going in the air and i tried trimming it like this and the buttons to trim but still...
plz help me any1 .
and also when its charge you charge the green light on the transmitter should turn off
but mine stays on and whn i remove the charger and try to fly it the red light flashes and the green light is still there
this is the exact heli i have
http://site.xheli.com/rc-helicopter1/rc-helicopter7.jpg
plz help me
Answer
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
I have had alot of experience with mini copters. I can say that 99% of the time the spinning issue is caused by several factors.
1. hair(s) just one hair wrapped around the tail rotor can cause it not to fly correctly. Check for hairs and strings , threads , etc.
2. the trim issue takes ALOT of time. It is digital so it needs several seconds to actually register into the processor bs so it can fine tune itself and set itself. Do this very , very slowly. It will take at least 5-10 minutes.
3. The battery connector harness is so tiny that if it is not plugged in snuggly and all the way in, it will cause it not to charge correctly. Try to verify it is snug by wiggling the harness a little. If it is too tight then it is not set correctly. If it is too loose then it needs to be pushed in harder.
While these are some common remedies there are others too.
Feel free too review my other questions I answered for some more info on micro R/C copters.
Feel free to email me for more specifics too.
Powered by Yahoo! Answers
