mini rc helicopter not flying image
Neil J
no its not the wind. im talking about the copter doesnt react to the remote like it does inside. outside theres more of a delayed reaction. tell me why is that?
Answer
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
It is because your helicopter most likely uses infrared technology.
So when flying outside...
It does work, but the signal is just shortened. The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened.
Now, if your helicopter had an antenna on it, and it isnt using infrared technology, then it is most likely due to interference. but I doubt it.
Does your remote look like this:
http://www.crazysales.com.au/products_pictures/15/1539_10601_F.jpg
something like that with a red thing on top? If yes, I answered your question properly.
can Remote Radio Control RC MINI Helicopter fly outside in the sun?
MR.S
I wanted to buy a "3 Channel Remote Radio Control RC MINI Helicopter HR" but I am not sure if it can fly outside in the sun, it also says: Controlled by digital technology. Infra red control system .
Does anyone know whats the infra red control system?
Answer
No, the 3 Channel Helicopter you are deciding to purchase can NOT be flown outside if there is sun. The sun disrupts the Infrared beam that is sent to your helicopter.
The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened. It is no rumor, it is true science.
No, the 3 Channel Helicopter you are deciding to purchase can NOT be flown outside if there is sun. The sun disrupts the Infrared beam that is sent to your helicopter.
The range of an IR signal is usually limited to around 30 feet or less. Infrared, also called optical control or opti-control, requires line-of-sight, that is, the LED on the IR transmitter must be pointing at the IR receiver in order to work. It doesn't see through walls. Depending on the strength of the IR signal and interference from sunlight or other infrared-transmitting devices, the range may be shortened. These limitations make IR unsuitable for RC vehicles intended for long-range flight, outdoor racing, and other activities where it may be difficult to stay in range and within line-of-sight.
So... now you know... Let me explain what you might see when you go outside and try. When you go out, you will try to fly your helicopter. It will work, but after a while, itll start flying by itself, and youll lose contorl. It will work, its just that your range is incredibly shortened. It is no rumor, it is true science.
Powered by Yahoo! Answers
Title Post: why wont my mini rc helicopter fly outside?
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 99998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
No comments:
Post a Comment